Rod Holder Liner with Lip Protection for 2300 Series - BlackAnti-fungal high-quality PVC; these liners fit into 2300 Series aluminum rod holders.Features:
Stylish Design
Protects reels from being ...
Rod Holder Liner with Lip Protection for 2300 Series - WhiteAnti-fungal high-quality PVC; these liners fit into 2300 Series aluminum rod holders.Features:
Stylish Design
Protects reels from being ...
Heavy-Duty Replacement Rod Holder Inner Tube Sleeve - 8.5", 30-DegreeThese are the Heavy Duty rod holder Inner Sleeves (FXD/ROT) for 30-degree / 15-degree / 00-degree rotating and fixed rod holder...
Universal Backing PlateThis is the 316 stainless backing plate for the rotating and fixed rod holders for added strength under the gunwale.The backing plate is 3mm/0.1" thick.
Heavy-Duty Replacement Rod Holder Inner Tube Sleeve - 8.5", 15-DegreeThese are the Heavy Duty rod holder Inner Sleeves (FXD/ROT) for 30-degree / 15-degree / 00-degree rotating and fixed rod holder...
Rotating Rod Holder 30 & 15-Degree Drain AttachmentThis is the Drain Attachment for the 30 & 15 degree rotating rod holder, made of 316 stainless steel and a brass swiveling pipe clamp.Spe...
EVO-360 Flush Mount Rotating Rod Holder with 8.5" Tube at 0 DegreesThe EVO-360 rotating rod holders are more of a revolution than an evolution.They completely revolutionize the conventional flush ...
Heavy-Duty Replacement Rod Holder Inner Tube Sleeve - 8.5", 0-DegreeThese are the Heavy Duty rod holder Inner Sleeves (FXD/ROT) for 30-degree / 15-degree / 00-degree rotating and fixed rod holders...
80 Series Wrench for Screwless Rod Holder Installation Crowsfoot WrenchFeatures:
For use with 80 Series Screwless Rod Holders
Allows for installation in locations with limited space
This product m...
70 Series Backing Plate for Flush Mount Rod/Cup HolderFeatures:
Cast 316L Stainless Steel
Distributes pressure evenly over 30 times more surface area than washers
70 Series Wrench for Screwless Rod Holder Installation Crowsfoot WrenchFeatures:
For use with 70 Series Screwless Rod Holders
Allows for installation in locations with limited space
This product m...
70 Series Socket for Screwless Rod Holder InstallationFeatures:
Required for the installation of screwless rod holders
Fits 1/2" drive ratchet wrenches
This product may not be returned to the orig...
Rod Holder Liner for 2200 Series Rod Holders - WhiteAnti-fungal, high-quality PVC liners that fit into flared-style aluminum rod holders.Features & Benefits:
Stylish design
Protects reels from...
Replacement Liner for 70 Series - WhiteReplacement liner for 70 series in-gunnel and clamp-on rod holders. This UV-resistant vinyl liner protects rods.Features:
Recessed liner (doesn't come to the...
Stainless Steel Rod & Cup Holder Threaded Backing PlateThis threaded backing plate is designed to be used with ALL Mate Series Combination Rod and Cup Holders EXCEPT Elite Screw-less.Features:...
340L Nylon Track AdapterFeatures:
Enables you to use all Scotty Rod Holders with 3 1/2″ wide track systems
Made with glass-filled nylon
Fits Bert’s, Trax Tech, etc...
Includes stainless steel fast...
Backing Plate for 70 Series Rod HoldersBacking plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and w...
Backing Plate for 80 Series Rod HoldersBacking plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and w...
Coiled Paddle LeashKeep a paddle close while paddling with the YakGear Coiled Paddle Leash. This new take on a traditional coiled cord leash solves the troubling problem of overstretched coil cord...
Coiled Fishing Rod LeashThe nonabsorbent YakGear Coiled Fishing Rod Leash provides the ultimate peace of mind by guaranteeing that an expensive rod and reel return to shore every time. Made from s...
320 Adaptable Rail Mount for 2" RailFeatures:
The 320 rail mount adaptor can be positioned almost anywhere along a 2″ rail
Includes a pair of inserts for both 1½” round rails, and the 1¼” square r...
Rod Butt Extender for Standard & Heavy Swivel Base Rod HoldersComes with one rod butt extender that is extra strong! Made of pure stainless steel. Used on short-butt rods and heavy-duty rod ho...
LED Rod Holder Cap Light - 2" DiameterLED RGB Rod Holder Cap attaches to the bottom of any 2” diameter rod holder. A Bluetooth Smart Phone Controller (403051-1) lets you operate this RGB LED Rod H...
LED Tube Insert for Existing Rod Holders 11' Long Cut To Fit Any AngleRetrofit your existing rod holder with the LED RGB Tube Insert. Just remove your existing liner, install the LED RGB Tube Inse...
LED RGB Rod Holder with Tube InsertThese LED RGB Rod Holders to have translucent tube inserts with bright RGB LEDs and a 30° angle. Or retrofit your existing rod holder with the LED RGB Tube Inser...
Adjustable Deep Drop Lead HolderFeatures:
Fits into gunnel rod holder
Adjustable angles, 0, 15 and 30 degree
Protect your boat and rod holders from damage
Perfect for Sword Fishing and Deep Droppi...
Backing Plate - StandardThese stainless steel backing plates are a perfect match for Rupp Rod Holder installations. Securely mounts with regular or large rod holders. Sold individually.
Portable Cleat - 36" Tall with 9" Cleat Features:
Constructed of anodized aluminum
Perfect for holding a fender at the sandbar, using as an extra cleat, or using as a hose holder while washing you...
Portable Cleat - 15" Tall with 9" CleatFeatures:
Constructed of anodized aluminum
Perfect for holding a fender at the sandbar, using as an extra cleat, or using as a hose holder while washing your...
HX Rod Holder Flag Pole - 54"Features:
Gimbal butt makes flying in any rod holder a breeze
Made of anodized aluminum
Easy to store
Fits standard 1-5/8” rod holders
54” Rod Holder Flag Pole
Holds 3...
Lipped Insert for 10" Flared Rod Holder - BlackFeatures:
Protective lip protects top of rod holder an also protects your spinning gear
For 10" flared rod holder
Color: Black
XD Flag PoleSpecifications:• 42” Rod Holder Flag Pole• Holds two 12” sandbar flags or one 20”x 24” dive flag• Gimbal butt makes flying in any rod holder a breeze• Made of anodized aluminum• Easy t...
Foam Rod HoldersVersatile 6 Rod Storage Rack. Molded frame with slit closed-cell foam inserts hold up to six rods safely and securely.Features:
Stores 6 rods neatly and securely
Mount horizontally...
Backing Plate - LargeThese stainless steel backing plates are a perfect match for Rupp Rod Holder installations. Securely mounts with regular or large rod holders. Sold individually.
Poly Rod StrapThe Poly Rod Strap is the best designed and highest quality of any rubber rod holding device on the market. These straps are molded of black polyurethane material that will retain it...
![YakGear Coiled Paddle Leash [CPL24]](http://rigidfrog.com/cdn/shopifycloud/storefront/assets/no-image-2048-a2addb12_535x.gif)
![YakGear Coiled Paddle Leash [CPL24]](http://rigidfrog.com/cdn/shopifycloud/storefront/assets/no-image-2048-a2addb12_195x195@2x.gif)
